App Cam Solo+ Solar Panel (SPS-01)

Normally the new batteries for App Cam Solo can last:
Stand-by: 6 months, based on 1 Detection A Day.
Constant working: 11 hours for day session or 6 hours in night mode.
Working duration of batteries from different brands may be different.

The battery’s life depends on if it is working in daytime or at night.
It can work about 650 mins at daytime and 400 mins at night.

There is no power button on the camera or power off option in Uniden Solo App.
If you want to power off the camera, please take out all the batteries.

It is advisable to use SD card rated for surveillance purpose and the maximum storage supported is 64GB.

If you don’t use a micro SD card for this camera, you can save recordings manually via the mobile APP which will reduce the life of the battery. If the camera works with an SD card, when the camera detects the motion events, it will automatically save the recordings to the SD card. So we recommend using a micro SD card.

Yes, this camera can record motion detection to SD card without a WiFi connection, but you need to activate this camera via WiFi or hotspot when you first get it.

The sound alert is on the camera side when motion is detected.
Yes, you can receive push notification text, email alert on the App from your device.

Yes, the siren can be turned off. Go to alarm option and disable Siren.

The PIR sensor’s detecting distance is 10 meters.

App Cam Solo support P2P technology, you can access it by scanning QR code on the camera. You don’t need to forward ports on your router.

It’s a WiFi camera, so it has to connect to WiFi. But it’s 100% wire-free when connecting it to WiFi, it doesn’t need an Ethernet cable like traditional WiFi cameras usually do.

It depends on the range of your router & network coverage. Network repeaters can be used to extend the distance of your network coverage.

Either of the methods works, you can either playback recorded footage with the App, or you could take the SD card out and view the footage on the computer.

There is no image in the notification, text only.

Yes, it has a mic and supports two way audio.

Yes, you could schedule the camera via Uniden Solo App, Device settings>PIR Settings>Schedule

This camera is triggered to record by motion detection, not your phone.

A motion detection will record for 6 seconds. If there is continuous motion detection, the camera will continue recording. Each video will be cut into 2 mins at most to store in SD card.

We have optional Solar Panel (SPS-01) that works with App Cam Solo+.

The solar panel only has 2.5W output power, it takes about 20 hours to fully charged with good sunlight source, so it is recommended to charge the camera with a wall charger first and only use Solar Panel for long term power.

Heavy usage of your camera can drain the camera battery faster than the Solar panel can recharge it, especially with poor sun exposure. If you find that your Solar Panel is not charging the camera, please make sure that the Solar panel is pointed toward the sun and is not obstructed by trees, buildings, or other obstacles. the camera is not in temperatures below freezing and reduce your camera usage for a day or two and note your camera’s battery level.

The camera batteries may indicate low battery level in cold weather because their internal chemical reactions slow significantly at low temperatures.
Because of the kinds of batteries they use, the optimum charging temperature for the battery is between 0°C and 45°C.