Uniden iGO CAM 90R 4K Dash Cam with Rear Camera & Hardwire Kit
Uniden iGO CAM 90R: Front and Rear Dash Cam with Hardwire Kit Road incidents can happen in seconds. Recording the view ahead and behind your vehicle gives you more context to refer back to, whether you are reviewing a collision, a close call or an unexpected event on your journey. The Uniden iGO CAM 90R combines front and rear recording with a 3.16-inch widescreen display, built-in GPS, Wi-Fi connectivity and voice control. This dash cam bundle also includes a hardwire kit to support parking mode when correctly installed and configured. Up to 4K front recording and a Full HD rear camera The front camera offers up to 4K (2160P) recording in supported configurations, while the included rear camera records in Full HD 1080P. Recording resolutions depend on the camera configuration. With a 135° front viewing angle and 150° rear viewing angle, the iGO CAM 90R helps document traffic approaching from both directions. Two camera views can make it easier to understand the sequence of an incident and what was happening behind your vehicle. 3.16-inch widescreen display with video playback View the camera feed and play back saved recordings on the built-in LCD colour screen. The widescreen layout gives you a...
Dash Cam Parking Mode: What a Hardwire Kit Adds to the iGO CAM 90R
TL;DR For the Uniden iGO CAM 90R, impact-triggered parking recording requires a compatible hardwire kit, sufficient external power and the G-Sensor to be enabled. The camera can wake after detecting an impact and record for a limited time. The iGO CAM 90R and hardwire kit bundle includes the power accessory for this setup. What is dash cam parking mode? Parking mode is a dash cam function intended for use while the vehicle is parked. The way it operates varies between cameras, so the useful question is what your particular model records and how it stays powered. With the iGO CAM 90R's impact-triggered parking function configured, a detected impact can wake the camera and start a recording for a limited time. This may help document an incident after it happens, provided power, camera positioning and visibility allow it. Because the camera wakes after an impact, this function should not be described as a guarantee of uninterrupted footage from before an incident. That distinction matters when comparing parking features. Why does parking mode need a hardwire kit? During normal driving, a dash cam receives power from the vehicle. If that supply switches off when you stop the engine, the camera needs another...
Introducing the Uniden iGO CAM 90R Dash Cam & Hardwire Kit Bundle
TL;DR The Uniden iGO CAM 90R dash cam and hardwire kit bundle combines front and rear cameras, a 3.16-inch screen and support for parking mode. The front camera is 4K-capable, while the rear camera records in Full HD. Recording resolution depends on camera configuration. A microSD card is required separately. Two road views, with parking mode in the same bundle A dash cam becomes most useful when you need to look back at a moment you could not fully take in while it happened. A vehicle approaches from behind. Traffic stops ahead. An incident unfolds in seconds, leaving you with only part of the picture. The [Uniden iGO CAM 90R dash cam and hardwire kit bundle](/products/igo-cam-90r-hardwire-kit) brings front and rear recording together with a built-in display and the power accessory needed to support parking mode. It gives drivers one package to plan around for both their daily journeys and time spent parked. The hardwire kit is the key addition in this bundle. Correct installation and settings allow the camera to use external power after the vehicle is switched off, rather than relying on its brief shutdown backup. What the iGO CAM 90R brings to the road The front camera offers...
